FD7256S
接口:SDIO
WIFI/蓝牙:WIFI 6/6E ; BT 5.3 频段:2.4G ; 5G
天线:2T2R
2.4G/5G物理层最大传输速率:572.4Mbps/1.2Gbps
带宽:80M
吞吐速率:520Mbps
认证:SRRC/ROHS/CE/FCC
尺寸:15mm*13mm
Product Name | FD7256S |
Product description | 802.11ax/ac/a/b/g/n 1T1R dual band Wi-Fi and Bluetooth 5.0 comb module |
Dimension | 12.0(±0.1)mm*12.0(±0.1)mm*1.65(±0.2)mm |
Power supply | VBAT:3.0~3.6V;VDDIO:1.62V~1.92V/3.0V~3.6V |
Host interface | SDIO3.0 + UART + PCM |
Footprint | LCC 44pin |
Operating temperature | -30°C to 70°C |
Operating humidity | 10% to 90% (Non-Condensing) |
Storage temperature | - 40°C to 85°C |
Pin Number | Pin Name | Pin Type | Pin Description |
1 | GND | G | Ground connections |
2 | WL_BT_ANT | RF | Wi-Fi & BT antenna I/O port |
3 | GND | G | Ground connections |
4 | NC | - | Floating (Don’t connected to ground) |
5 | NC | - | Floating (Don’t connected to ground) |
6 | NC | - | Floating (Don’t connected to ground) |
7 | NC | - | Floating (Don’t connected to ground) |
8 | GND | - | Ground connections |
9 | VBAT | P | Main power voltage source input |
10 | NC | - | Floating (Don’t connected to ground) |
11 | NC | - | Floating (Don’t connected to ground) |
12 | CHIP_EN | I | Module enable signal |
13 | WL/HOST_WAKE_GIPO0 | I/O | Wake up signal with auto negotiation |
14 | SDIO_DATA_2 | I/O | SDIO data line 2 |
15 | SDIO_DATA_3 | I/O | SDIO data line 3 |
16 | SDIO_DATA_CMD | I/O | SDIO command line |
17 | SDIO_DATA_CLK | I/O | SDIO clock line |
18 | SDIO_DATA_0 | I/O | SDIO data line 0 |
19 | SDIO_DATA_1 | I/O | SDIO data line 1 |
20 | GND | G | Ground connections |
21 | NC | - | Floating (Don’t connected to ground) |
22 | VDDIO | P | I/O Voltage supply input |
23 | NC | - | Floating (Don’t connected to ground) |
24 | NC | - | Floating (Don’t connected to ground) |
25 | PCM_OUT | O | PCM Data output |
26 | PCM_CLK | I/O | PCM clock |
27 | PCM_IN | I | PCM data input |
28 | PCM_SYNC | I/O | PCM sync signal |
29 | NC | - | Floating (Don’t connected to ground) |
30 | NC | - | Floating (Don’t connected to ground) |
31 | GND | G | Ground connections |
32 | NC | - | Floating (Don’t connected to ground) |
33 | GND | G | Ground connections |
34 | WL/HOST_WAKE_GIPO1 | I/O | Wake up signal with auto negotiation |
35 | NC | - | Floating (Don’t connected to ground) |
36 | GND | G | Ground connections |
37 | NC | - | Floating (Don’t connected to ground) |
38 | NC | - | Floating (Don’t connected to ground) |
39 | NC | - | Floating (Don’t connected to ground) |
40 | NC | - | Floating (Don’t connected to ground) |
41 | UART_RTS_N | I/O | UART DCE request send signal |
42 | UART_TXD | I/O | UART TX signal |
43 | UART_RXD | I/O | UART RX signal |
44 | UART_CTS_N | I/O | UART DEC clear send signal |